How to: Wooden Arrow Wall Decor

Rob and I wanted Baby Rebhan's nursery to be perfect. We looked at lots of pictures and decided on certain elements we liked. We chose to make whatever we could instead of buying. It was fun to create items from simply looking at a picture and we saved lots of money doing it that way! 

One of my favorite elements in the nursery is the wooden arrow decal above our son's crib. It was a simple project that we finished in one day and it makes a big statement! 

Here is a step by step of how we completed this simple project!! 

1. GETTING SUPPLIES: We went to Home Depot to buy the wood, metal plates, screws, and brackets to hang our finished product.

For three arrows:

   - Wood: 2 Poplar 1x5 boards (6 feet each)

   - 3 L-shaped Metal Plates

   - 1inch screws

   - 3 picture hanging toothed brackets 

2. MAKING THE CUTS: We cut each board into 6 individual sections. We saved wood by making angled cuts instead of later trimming rectangles. The first cut should start at the bottom corner of the board while it's laying flat on your saw; cut a 45 degree angle off the end. You'll end up with a small triangle falling off the full board. The rest of the cuts should be measured from the bottom of the board, we chose to use 10 inch increments. The image below is a representation of the first segment only, imagine the board extending to the right (another small triangle will fall off the far end too). 

3. SANDING: After cutting the boards (see all the extra triangles in the photo below!), we sanded them so there were no rough edges from the cutting. We didn't spend a lot of time making the boards perfect because no one would ever touch them. We just made sure there were no frayed ends!

4. STAINING: After wiping any remaining sanding dust off the boards, I used old rags to apply Minwax Wood Stain in Special Walnut 224. Fortunately, we had this stain lying around the house (I had bought it for a previous project but ended up using another color). I like to use rags because the stain goes on in a thin layer verses using foam brushes and having to wipe off the access later. I also like it because you can see the result immediately. I ended up using two coats, I thought about three but figured it would be too dark compared to the other wooden elements in the nursery. We chose not to seal the arrows because, again, no one was going to be touching them and they wouldn't ever be exposed to high amounts of moisture (read water rings). 

   

5. ASSEMBLY: After all the boards were dry I matched them up in groups of four that fit best together. Even though they are all cut the same, there is always some human error. Once they were matched, I was able to pick which side of each board I liked the best. Because some have knots and some don't the stain is a little different on each piece. After I decided what pieces went best together, I laid the arrow face down and lined up the metal plate. I decided to put the screws in with a screwdriver instead of an electric drill with just a little (wo)man power! I was worried that the electric drill would split the wood and I didn't want to have to start over! Once the arrows were whole, I attached my hooks. I found that the "center" of the arrow was above the top corner of the metal bracket and that's where I nailed in the hooks (not pictured).  

6. HANG IT UP! It's as simple as that, hang on desired wall and enjoy!! 

I hope this can inspire you to create your own version of something you found online! It can be fun to create without guidelines but if you need them, here they are! Please let us know if you have any questions by commenting here or emailing us. As always, ENJOY and show us what you come up with!! 

adding a kitchen shelf

When we retiled the kitchen to make way for the hood, we were left with a big open space between the counter and the newly installed hood. It looked much nicer than it had before we took the giant microwave out, but it was still missing a little character (and storage space). Lindsey keeps the oils, salt and pepper, etc. in a wooden box behind the cooktop but it has to be moved every time we cook so it doesn't burn... not a great situation. So she came up with a solution: since the inside of the cupboards had to be painted white anyway, she wanted to make a little addition of a shelf between the cupboards. Now, when she first suggested this to me I was worried about a full shelf over the cooktop, thinking that the heat wouldn't be a good idea under the shelf... understandable right!? (Lindsey says: "He often acts as my common sense, ha!") Once she made it clear that it was only to be about 4 inches deep I was on board!

It's fun to make something out of nothing even if it's a really simple project like this one. We felt somewhat more proud of this project than others because it was an idea that started in our minds and came out exactly as we wanted!

I started by measuring and using my awesome miter saw to cut the pieces that the shelf would rest on. Because it isn't a very wide space and the wood we were using was good quality we didn't need to anchor the middle of the shelf. The shelf is 3 3/8 inches deep (quite a random number but it was half of an existing scrap of wood) and about 34 inches long. 

         

I used a drill bit to make pilot holes in the wood blocks as well as the adjoining cupboards in order to make screwing in the screw a bit easier. My first block install went fine until I put the screw in - the wood split, proof that even "easy" projects can be a bit frustrating. I was thankful that this happened on my first go-round because I could start fresh! 

       

After I got the blocks flush to the bottom of the cabinets and attached with no splitting, it was smooth sailing. We had planned to just attach the shelf with liquid nails (our favorite adhesive so far) and start painting. The plan would have worked brilliantly had we not run into a slight leveling problem. It wasn't any measuring or installing on our part, the cabinets are actually about 1/4 inch off from one another and when you are looking at a long "straight" shelf that isn't straight - it's quite noticeable.

All we had to do was add a scrap of wood with the liquid nails, wait for that to dry and then putty in the gaps! Not really a whole lot of extra work, just some unexpected problem solving! 

  

 

Far left: liquid nails to hold left side of shelf, Middle left: liquid nails with added piece of scrap,

Middle right: caulking the gaps, Far right: the side with the added scrap has been filled and caulked

Once everything dried and the shelf was set into place, it was time for the first layer of paint. As you can see, Lindsey does all the "make it pretty" work as she is a bit better at it than I! We used Glidden eggshell white paint which matched the kitchen cabinets. After one layer of paint, it was very clear that more than one layer of paint was required and the "unfinished" edge of the shelf needed to be sealed between the first and second coats of paint. 

Once the putty sealed fully we were able to finish off the painting and "set up shop" with our new shelf; so far so good! 

We have had a busy weekend - just wait and see what we have coming up next. 

Thanks, as always, for reading and following along with Lindsey and I as we refinish and set up our home! 

Until next time, Rob

I just had to add on this picture that Lindsey took while I was cleaning some duct tape off our front window. Our dogs are so fun!

It's hard to see, but that is Oswin's silhouette and Harlee is down in the darkened left corner.